frogAct1-3
Multifunctional 1-channel switching actuator for lights or other appliances with 3 input to query buttons and switches (110-240V~). With comfort and timer functions, power measurement and short-circuit detection. (1x 400 W @ 230 V~).
1Category:
Description
The small green control modules, called frogs, are the heart of every frogblue system and form the basis of frogblue's Bluetooth®-based smart building solution. Our frogs switch, dim, measure, open doors or react to buttons, switches and window contacts.
Connected to the mains or battery-powered, they use the frogblue Bluetooth® mesh network to create "virtual cables" between each other, forward messages and thus extend the range. Data transmission between the frogs is exclusively encrypted (128-bit) in addition to Bluetooth®. Frogs are smart, packed with innovative functions, very easy to configure and do not require a central unit or control cabinet. With a power consumption of just 0.2 watts, they are also extremely energy-efficient.
Installed in the deep flush-mounted box (recommended box depth: 63mm) behind every conventional switch/button, the distribution box, a weatherproof box outdoors or the lamp outlet, this multifunctional 1-channel actuator can be used to turn on the light or others Consumers are switched.
For example, with this and other frogs you can quickly and easily implement alternating or cross-connection. Without laying cables, without a central unit and without control components in the sub-distribution. The living room, dining room and kitchen lights are controlled with just three frogblue units (frogAct1-3) behind the light switches/buttons, because three light switches/buttons can be connected to each of the 400 W actuators become.
Building-wide central functions or lighting scenarios can also be assigned to the buttons using different button patterns (double click, etc.). A double click on all or selected buttons could be configured to centralize all three rooms.
The frogs can be controlled with the frogblue HomeApp via the smartphone or tablet (iOS and Android), the frogDisplay, the frogKey or simply via the conventional switch/button connected to a frog. We always recommend buttons, as the full range of functions can be used through individual and different tactile patterns, such as double or triple click, etc.
Product features
Short-circuit protection
Temperature cut-out (>75 °C)
Switch status feedback
Parametrisable switch on and switch off times
Switch on and switch off delay
Mains supply via power cable, no additional cabling required between frogblue modules.
Intended use
For assembly in device sockets according to DIN 49073. Socket depth minimum 53 mm when installed behind switch insert, individual installation is required at lower depth.
System information
This device is a product of the frogblue system. Detailed technical expertise obtained through frogblue training sessions is a prerequisite. The functionality of the device depends on the software. Detailed information regarding software versions and the respective range of functions can be found on the frogblue website. Technical descriptions, additional detailed instructions as well as notes, information regarding proper disposal can be found in the manual, which is available on the frogblue website. Commissioning and configuration will be executed using the frogblue app.
Safety information
Electrical appliances may only be installed and assembled by qualified electricians. Failure to observe the instructions may result in damage to the appliance, fire or other hazards! Risk of electric shock. Country-specific regulations must be observed.
Once the user has seen at least one product this snippet will be visible.
Recently viewed Products
To install this Web App in your iPhone/iPad press 
and then Add to Home Screen.
