frogAct1-1
Multifunctional 1-channel actuator with one input to activate/deactivate lights or other appliances featuring 1 Input for integration of switches and other devices (110- 240 V~). Featuring integrated logic module with comfort and timer functions, power measurement and short circuit detection (1x 400 W @ 230 V~).
1Category:
Description
The small green control modules, called frogs, are the heart of every frogblue system and form the basis of frogblue's Bluetooth®-based smart building solution. Our frogs switch, dim, measure, open doors or react to buttons, switches and window contacts.
Connected to the mains or battery-powered, they use the frogblue Bluetooth® mesh network to create "virtual cables" between each other, forward messages and thus extend the range. Data transmission between the frogs is exclusively encrypted (128-bit) in addition to Bluetooth®. Frogs are smart, packed with innovative functions, very easy to configure and do not require a central unit or control cabinet. With a power consumption of just 0.2 watts, they are also extremely energy-efficient.
Installed in the deep flush-mounted box (recommended box depth: 63mm) behind every conventional switch/button, the distribution box, a weatherproof box outdoors or the lamp outlet, this multifunctional 1-channel actuator can be used to turn on the light or others Consumers are switched.
For example, you can use this frog and another frog as an input module, e.g. The frogIn3-AC, indoors, can flexibly switch the outdoor lighting using 3 inputs (buttons or switches) without any additional infrastructure. Supplied with power and connected to the corresponding lamp, a lighting circuit with up to 400 W can be controlled via the 1 output of the frogAct1-1. Any external sensor, such as a motion detector, can be connected to its input (230 V). If the motion detector is triggered, all spotlights equipped with frogs switch on wirelessly for a preselected time. A short flashing of one of the spotlights signals the trigger location.
The frogs can be controlled with the frogblue HomeApp via the smartphone or tablet (iOS and Android), the frogDisplay, the frogKey or simply via the conventional switch/button connected to a frog. We always recommend buttons, as the full range of functions can be used through individual and different tactile patterns, such as double or triple click, etc.
Product features
Short-circuit protection
Temperature cut-out (>75 °C)
Switch status feedback
Parametrisable switch on and switch off times
Switch on and switch off delay
Main supply via power cable, no additional cabling required between frogblue modules.
Intended use
Installation in appliance box in accordance with DIN 49073. Box depth min. 53 mm for installation behind switch insert; individual installation is necessary if the depth is less. A box depth of 63 mm is recommended.
System information
This device is a product of the frogblue system. Detailed technical expertise obtained through frogblue training sessions is a prerequisite. The functionality of the device depends on the software. Detailed information regarding software versions and the respective range of functions can be found on the frogblue website. Technical descriptions, additional detailed instructions as well as notes, information regarding proper disposal can be found in the manual, which is available on the frogblue website. Commissioning and configuration will be executed using the frogblue app.
Safety information
Electrical appliances may only be installed and assembled by qualified electricians. Failure to observe the instructions may result in damage to the appliance, fire or other hazards! Risk of electric shock. Country-specific regulations must be observed.
Once the user has seen at least one product this snippet will be visible.
Recently viewed Products
To install this Web App in your iPhone/iPad press 
and then Add to Home Screen.
