frogDim1-0
Multifunctional 1-channel dimming actuator to dim or switch lights on/off (110-240 V~). Switching and dimming functionality for all approved trailing-edge phase control dimming lighting; Leading-edge phase control only for inductive load approved. Featuring integrated logic module with comfort and timer functions, power measurement and short circuit detection (1x 300 W @ 230 V~).
1Category:
Description
The little green control modules, called frogs, are the heart of every frogblue system and form the basis of frogblue's Bluetooth®-based smart building solution. Our frogs switch, dim, measure, open doors or respond to push buttons, switches and window contacts.
Connected to the mains or battery-powered, they establish "virtual cables" between each other via the frogblue Bluetooth® mesh network, relaying messages and extending their range. Data transmission between the frogs is exclusively encrypted (128-bit), in addition to Bluetooth®. Frogs are smart, bursting with innovative features, easy to configure and do not require a central processing unit or control cabinet. With a power consumption of only 0.2 watts, they are also exceptionally energy-conscious.
Installed in the deep flush-mounted box (recommended box depth: 63mm) behind any conventional switch/button, junction box, weatherproof outdoor box or lamp outlet, this multifunctional 1-channel dimming actuator can be used to switch and dim all lamps approved for phase control. Phase control is only allowed for inductive loads.
For example, with this frog and another frog as an input module, e.g. the frogIn3-AC, you can flexibly switch the dimmable light in the garden house indoors via 3 inputs (pushbuttons or switches) without any additional infrastructure. Supplied with power and connected to the corresponding lamp, a light circuit with up to 300 W can be controlled via the 1 output of the frogDim1-0.
If and how dimming is done is freely configurable. In the night gladly differently than in the day. Additional functions, such as building-wide central on/off or room-wide lighting scenarios, can be defined with the frogblue ProjectApp.
The frogs can be controlled with the frogblue HomeApp via smartphone or tablet (iOS and Android), the frogDisplay, the frogKey or simply via the conventional switch/button connected to a frog. We always recommend pushbuttons, as this way the full range of functions can be used through individual and different pushbutton patterns, such as double or triple click, etc.
Product characteristics
Short-circuit protection
Temperature cut-out (>75 °C)
Feedback of the switching state and the dimming value
Parameterizable switch-on and dimming behavior
Switch-on and switch-off delay with switch-off warning
Supply via mains line, no additional cabling between frogblue modules necessary
Phase angle or phase section control switchable via frogblue app (phase angle control only permitted for inductive loads)
Intended use
Montage in Gerätedose nach DIN 49073. Dosentiefe min. 53 mm bei Installation hinter Schaltereinsatz; bei geringerer Tiefe ist Einzeleinbau notwendig. Empfohlen wird eine Dosentiefe von 63mm.
System information
This device is a product of the frogblue system. Detailed technical expertise obtained through frogblue training sessions is a prerequisite. The functionality of the device depends on the software. Detailed information regarding software versions and the respective range of functions can be found on the frogblue website. Technical descriptions, additional detailed instructions as well as notes, information regarding proper disposal can be found in the manual, which is available on the frogblue website. Commissioning and configuration will be executed using the frogblue app.
Safety information
Electrical devices may only be installed and assembled by qualified, skilled electricians. Failure to observe the instructions can cause damage to the device and result in fire and other hazards. Danger caused by electric shock. Device is not suitable for disconnection from power voltage. Even when the device is turned off, the load is not electrically isolated from the mains. Before starting work on the device or replacing light sources, always disconnect the power supply and switch off the circuit breakers. Country-specific regulations must always be observed.
Once the user has seen at least one product this snippet will be visible.
Recently viewed Products
To install this Web App in your iPhone/iPad press 
and then Add to Home Screen.
