The small green control modules, called frogs, are the heart of every frogblue system and form the basis of frogblue's Bluetooth®-based smart building solution. Our frogs switch, dim, measure, open doors or react to buttons, switches and window contacts.
Connected to the mains or battery-powered, they use the frogblue Bluetooth® mesh network to create "virtual cables" between each other, forward messages and thus extend the range. Data transmission between the frogs is exclusively encrypted (128-bit) in addition to Bluetooth®. Frogs are smart, packed with innovative functions, very easy to configure and do not require a central unit or control cabinet. With a power consumption of just 0.2 watts, they are also extremely energy-efficient.
Installed in the deep flush-mounted box (recommended box depth: 63mm) behind every conventional switch/button, the distribution box, a weatherproof box outdoors or the roller shutter box, you can use this multifunctional 2-channel relay switch with two relay switches. Outputs and two inputs primarily control the shading, i.e. blinds, shutters, roller blinds, awnings or the pool cover without new cables. And you can do this from anywhere in the entire building.
Shading control can also be carried out fully automatically using user-defined time programs. The same applies in combination with the frogDisplay and the astro function it contains, with which you can start the day every day at sunrise by automatically opening the slats.
The frogblue relay modules are designed to control a total of 1200 W. In addition to the shading control, other consumers can also be switched with the frogRelay2-2. These include, for example, the garage door or LED strips with a higher power consumption.
If you use the free input channels of other frogs included in the system, you can integrate external sensors, such as a wind monitor or a weather station. When there is a storm, the blinds move up automatically and cannot be lowered manually. Alternatively, they automatically shut down when the sun heats up the room or ramp up when frost occurs.
The frogs can be controlled with the frogblue HomeApp via the smartphone or tablet (iOS and Android), the frogDisplay, the frogKey or simply via the conventional switch/button connected to a frog. We always recommend buttons, as the full range of functions can be used through individual and different tactile patterns, such as double or triple click, etc.
Switch status feedback
Parametrisable switching on and switching off behaviour
Switch on and switch off delay
Mutual locking of outputs in motor mode/roller blind mode (configuration using the frogblue app)
Mains supply via power cable, no additional cabling required between frogblue modules.
Installation in a device box according to DIN 49073. Box depth min. 53 mm when installed behind switch insert; If the depth is shallower, individual installation is necessary. A can depth of 63mm is recommended.
This device is a product of the frogblue system. Detailed technical expertise obtained through frogblue training sessions is a prerequisite. The functionality of the device depends on the software. Detailed information regarding software versions and the respective range of functions can be found on the frogblue website. Technical descriptions, additional detailed instructions as well as notes, information regarding proper disposal can be found in the manual, which is available on the frogblue website. Commissioning and configuration will be executed using the frogblue app.
Electrical devices may only be installed and assembled by qualified, skilled electricians. Failure to observe the instructions can cause damage to the device and result in fire and other hazards. Danger caused by electric shock. Before starting work on the device or replacing light sources, always disconnect the power supply and switch off the circuit breakers. When using the load outputs simultaneously, the total load of 1200W must not be exceeded. Country-specific regulations must always be observed.
Once the user has seen at least one product this snippet will be visible.
Recently viewed Products
To install this Web App in your iPhone/iPad press and then Add to Home Screen.